Connecting the phoropter to the tablet
The pairing procedure needs to be done once, the first time you use the equipment.
To pair the phoropter with the tablet
➢ Make sure the battery of the tablet is fully charged.
➢ Go to the Settings menu of the tablet.
➢ Activate the Bluetooth.
The tablet searches for the available devices.
➢ Select VX65 HEAD-xxxxxx.
xxxxxx are the 6 last numbers of Bluetooth MAC address of phoropter head which are
indicated on the label which is stuck on your VX65.
➢ When a password is requested, enter the following digits: 1234.
➢ Select OK.
The two devices are paired.
To connect the phoropter with the tablet
➢ Launch the VX65 application installed on the tablet.
➢ Go to the Bluetooth menu.
➢ Select VX65 HEAD-xxxxxx.
➢ Select OK.
The following message is displayed: "Connection OK".
The two devices are then connected.
To Next Page
Loading...
