Visionix vx65 - How Do I Manipulate Data; How Do I Display Other Refractions; How Do I Copy;Paste Data; How Do I Clear Data

How do I…?
VX65 User Guide
75 / 86
How do I manipulate data?
How do I display other refractions?
➢ Tap on Exam file button.
Exam file interface opens. It displays all the refractions (OBJ, LM, SUBJ1, and SUBJ2).
➢ Select the refraction you want.
The selected refraction is displayed in front of the patient’s eye.
Remark: OBJ and LM can be selected only if they are not empty.
To compare two refractions:
➢ Select alternatively the 2 refractions you want to compare.
To record VA for a refraction:
➢ Select the refraction you want.
➢ Tap on exit to close the Exam file interface.
Examination interface is displayed.
➢ See How do I measure visual acuity? page 74.
To change SUBJ1 or SUBJ2
➢ Select the refraction you want (SUBJ1 or SUBJ2).
➢ Tap on exit to close the Exam file interface.
Examination interface is displayed.
➢ See:
• How do I change the refraction values? page 69 for Manual mode interface.
• How do I change the refraction values? page 71 for Automatic mode interface.
How do I copy/paste data?
➢ Tap on Exam file button.
Exam file interface opens. It displays all the refractions (OBJ, LM, SUBJ1, and SUBJ2).
➢ Select the data to copy (OBJ, LM, SUBJ1 or SUBJ2).
➢ Tap on copy/paste button.
The field of selected data appears with a white border.
Remarks:
If OBJ or LM are selected, only SUBJ1&SUBJ2 are enabled.
If SUBJ1 is selected, only SUBJ2 is enabled.
If SUBJ2 is selected, only SUBJ1 is enabled.
The copy/paste button stays taped until the user taps on SUBJ1 or SUBJ2.
➢ Tap on SUBJ1 or SUBJ2.
The data are copied in taped SUBJ.
If you want to cancel the copy/paste (before SUBJ1 or SUB2 selection):
➢ Tap again on copy/paste button.
How do I clear data?
From the screen (with Exam file interface)
➢ Tap on Exam file button.
Exam file interface opens. It displays all the refractions (OBJ, LM, SUBJ1 and SUBJ2).
➢ Select the data to clear (OBJ, LM, SUBJ1 or SUBJ2).
➢ Tap on Clear data button.
When the data is cleared, everything returns to zero, including VA, Px, Py…
From the screen (with Automatic mode of examination interface)
➢ Tap on Reset button in the heading area while data to clear is selected (SUBJ1 or
SUBJ2).