Visionix vx65 - Input Data Window

Using the VX65
VX65 User Guide
42 / 86
Input data window
This window is used to set the Input data (OBJ and/or LM), either loading them or setting
them.
No.
Description
1
Close the window without saving the modifications or selections.
2
OBJ data area
3
ID of OBJ (job number of OBJ)
When “Load data by ID” is activated in the setting, there is a field to select the ID of OBJ data
to load.
Else, it displays the ID of selected data.
4
Values of OBJ
5
Set manually OBJ data button
Tap on this area opens Add OBJ data window.