wc_tx003871gb_FM10.fm
157
Machines with Aftertreatment Exhaust System
Continued from the previous page.
2. Set the engine start switch (a) to the REMOTE START position. The DEF level
(in percentage of the DEF tank capacity) is displayed on the left side of the LCD
screen.
3. Start the engine by setting the engine start switch to the START/RUN position.
Note: The controller will only display the increasing DEF level while the engine is
running.
4. Fill the DEF tank until the DEF level reaches 100%.
5. Re-install the DEF cap.
6. Place the engine start switch in the OFF position.
00
READY100%
0.0P2
13% 0 25.363
A
Ø
HZ
V
R
Basler
DIAGNOSTICS
DIAGNOSEN
DIAGNOSTICOS
DIAGNOSTICS
AUSAUS
APAGADOAPAGADO
ARRETARRET
OFFOFF
REMOTE STARTREMOTE START
FERNSTARTFERNSTART
ARRANQUE REMOTOARRANQUE REMOTO
DEMARRAGE A DEMARRAGE A
DISTANCEDISTANCE
START / LAUFENSTART / LAUFEN
ARRANQUE / MARCHAARRANQUE / MARCHA
DEMARRER / MARCHEDEMARRER / MARCHE
START / RUNSTART / RUN
wc_gr012292
a
To Next Page
Loading...