WEG CFW08 Vector inverter Plus User Manual

13
CFW-08 - QUICK PARAMETER REFERENCE
Only available in
vector mode
(P202=2).
Only available
in vector mode
(P202=2).
Only available
in vector mode
(P202=2).
According
to inverter
model
(1)
This parameter can be changed only with the inverter disabled (motor stopped).
MOTOR PARAMETERS (P399 ... P499)
Rated Parameters
P399
(1)
Rated Motor Efficiency 50.0 ... 99.9% 101
P400
(1)
Rated Motor Voltage
0 ... 600V 101
P401 Rated Motor Current 0.3xI
nom
... 1.3xI
nom
101
P402 Rated Motor Speed 0 ... 9999rpm 101
P403
(1)
Rated Motor Frequency 0.00 ... P134 101
P404
(1)
Rated Motor Power
0 = 0.16HP / 0.12kW
1 = 0.25HP / 0.18kW
2 = 0.33HP / 0.25kW
3 = 0.50HP / 0.37kW
4 = 0.75HP / 0.55kW
5 = 1HP / 0.75kW 102
6 = 1.5HP / 1.1kW
7 = 2HP / 1.5kW
8 = 3HP / 2.2kW
9 = 4HP / 3.0kW
10 = 5HP / 3.7kW
11 = 5.5HP / 4.0kW
12 = 6HP / 4.5kW
13 = 7.5HP / 5.5kW
14 = 10HP / 7.5kW
15 = 12.5HP / 9.2kW
P407
(1)
Rated Motor Power
0.50 ... 0.99 102
Factor
Measured Parameters
P408
(1)
Self-Tuning
0 = No
0- 102
1 = Yes
P409 Motor Stator Resistance 0.00 ... 99.99Ω 103
SPECIAL FUNCTION (P500 ... P599)
PID Regulator
P520 PID Proportional Gain 0.000 ... 7.999 1.000 109
P521 PID Integral Gain 0.000 ... 9.999 1.000 109
P522 PID Differential Gain 0.000 ... 9.999 0.000 109
P525
Setpoint Via Keypad of the
0.00 ... 100.0% 0.00 109
PID Regulator
P526 Process Variable Filter 0.01 ... 10.00s 0.10 109
P527 PID Action
0 = Direct
0109
1 = Reverse
P528
Process Variable
0.00 ... 99.9 1.00 109
Scale Factor
P536 Automatic Setting of P525
0=Active
0109
1=Inactive
According
to inverter
model
(motor
matched
to the
inverter -
see item
9.3)
and sales
market
Parameter Function
Adjustable Range
Factory User
Note Page
Setting Setting

WEG CFW08 Vector inverter Plus Specifications

General

Frequency	50/60 Hz
Output Frequency	0-400 Hz
Overload Capacity	150% for 60 seconds
Protection Degree	IP20
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Braking	Dynamic braking (with optional braking resistor)
Communication Interface	RS-485 (Modbus RTU)
Ambient Temperature	-10°C to +50°C
Humidity	5 to 95% non-condensing
Cooling Method	Fan Cooled
Dimensions	Varies depending on model (refer to specific model datasheet)
Power Range	0.75-15 kW
Input Voltage	200-240V AC
Storage Temperature	-25°C to 65°C (-13°F to 149°F)