WEG CFW08 Vector inverter Plus User Manual

25
GENERAL INFORMATION
2.4 CFW-08 IDENTIFICATION
Figure 2.4 - Description and location of the nameplates
Software
Version
Hardware
Revision
Rated Input Data
(Voltage, Number of
Phases Current,
Frequency)
Manufacturing DateWEG Part NumberSerial Number
CFW-08 Model
Rated Output Data
(Voltage, Frequency)
Lateral Nameplate of the CFW-08
Frontal Nameplate of the CFW-08 (under the keypad)
Note: To remove the
keypad, see instructions
in 8.1.1 (Figure 8.2).
WEG Part Number
Seriel Number
CFW-08-Model
Manufacturing Date
Hardware Revision
Software Version

WEG CFW08 Vector inverter Plus Specifications

General

Frequency	50/60 Hz
Output Frequency	0-400 Hz
Overload Capacity	150% for 60 seconds
Protection Degree	IP20
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Braking	Dynamic braking (with optional braking resistor)
Communication Interface	RS-485 (Modbus RTU)
Ambient Temperature	-10°C to +50°C
Humidity	5 to 95% non-condensing
Cooling Method	Fan Cooled
Dimensions	Varies depending on model (refer to specific model datasheet)
Power Range	0.75-15 kW
Input Voltage	200-240V AC
Storage Temperature	-25°C to 65°C (-13°F to 149°F)