WEG CFW08 Vector inverter Plus User Manual

Summary of Revisions
The table below describes all revisions made to this manual.
Revision Description Section
1 First Edition -
2 Item 3.3 - CE Installation Included See item 3.3
3 General Revision -
4
External Parallel Keypad and
See item 8.3
Fixs Kit Included and
and 8.12
General Revision
5 General Revision -
6
Description changed of the Parallel Cable
See item 8.5
for the External Parallel Keypad.
and 6.3.5
Item 7.5 (Spare Part List) Removed.
Parameter 536 included
and General Revision

WEG CFW08 Vector inverter Plus Specifications

General

Frequency	50/60 Hz
Output Frequency	0-400 Hz
Overload Capacity	150% for 60 seconds
Protection Degree	IP20
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short Circuit
Braking	Dynamic braking (with optional braking resistor)
Communication Interface	RS-485 (Modbus RTU)
Ambient Temperature	-10°C to +50°C
Humidity	5 to 95% non-condensing
Cooling Method	Fan Cooled
Dimensions	Varies depending on model (refer to specific model datasheet)
Power Range	0.75-15 kW
Input Voltage	200-240V AC
Storage Temperature	-25°C to 65°C (-13°F to 149°F)