Weidemann Basic line 4080T - Page 19

Usage
Limits of the vehicle 3.2
19
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
Temperature °C Operating time in hours (h)
-20° 3
-10° 2
-5° 1.5
0° 1
+10° 1
Requirements for connecting the engine and hydraulic oil
preheating
ü 230 volt mains supply
ü Maximum 16 ampere fuse protection
ü Fault current protective switch
ü Plug receptacle with grounding contact
ü The vehicle body and the grounding conductor of the plug receptacle
must be conductively connected together under all circumstances.
▪ Connecting the engine and hydraulic oil preheating.
1
A
Fig.2: Connecting the engine and
hydraulic oil preheating
Connecting the engine and hydraulic oil preheating
1. Park the vehicle near a 230volt plug receptacle with a fault current
protective switch.
2. Connect special cable A supplied with vehicle plug receptacle 1.
3. Connect the plug to a 230 volt plug receptacle.
ð The engine and hydraulic oil is then preheated.
Before starting the engine
1. Remove the plug from the 230 volt plug receptacle.
2. Unplug special cable A from vehicle plug receptacle 1.
3. Securely store special cable A.
3