Safety
Operating 4.4
23
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
4.4
Operating
4.4.1
Preparative measures
• Operation is only allowed with correctly installed and intact protective
structures.
• Keep the vehicle clean. This reduces injury, accident and fire haz-
ards.
• Safely store objects you carry with you in the places provided for this
(for example in the storage compartment, drinks holder).
• Do not carry objects with you that protrude into the operator’s work
space. They can create another danger in case of an accident.
• Observe all safety and information labels.
• Start and operate the vehicle only with the seat belt fastened and only
from the place provided for this.
• Check the condition and the fastening of the seat belt. Have malfunc-
tioning seat belts and mounting hardware replaced by an authorized
service center.
• Before starting work, adjust the seating position so that all control ele-
ments can be reached and fully operated.
• Only make personal settings when the vehicle is at a standstill (e.g.
seat, steering column).
• Ensure that all safety devices are properly installed and functional be-
fore starting work.
• Before starting work or after interrupting work, ensure that the brake,
steering, signaling and light systems are functional.
• Before commissioning the vehicle, ensure that nobody is in the
danger zone.
4
To Next Page
Loading...
