Weidemann Basic line 4080T - Hydraulics

Technical data
Hydraulics 12.6
241
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
Description of the brake
Design Hydraulically operated disc or drum brake, acting on
both axles via drive shaft.
Parking brake
Location Front axle
Design Mechanical braking effect on service brake via Bowden
cable. Actuation via handbrake lever.
12.5.3
Air pressure table for the tires
NOTICE
Incorrect tire pressure can damage the tires!
► Observe the tire manufacturer's instructions.
► Check tire pressure regularly.
Tires Air pressure in bar
15.5/55-18 4.0
400/70-20 4.0
405/70-18 4.0
405/70-20 3.5
500/45-20 2.5
550/45-22.5 2.5
340/80-18 4.0
12.5.3.1
Tightening torques for wheels
Thread Tightening torque
M14x1.5 150Nm
M18x1.5 285Nm
M20x1.5 400Nm
M22x1.5 500Nm
12.6
Hydraulics
12.6.1
Drive hydraulics data
Data
Flow rate 128.8 l/min
Flow rate Option 1 163.3 l/min
Working pressure 450 bar
Driving speed 0km/h to 20km/h
12