EasyManua.ls Logo

Weidemann Basic line 4080T - Attachment and Trailer Operation Safety

Weidemann Basic line 4080T
250 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
4.6 Trailer operation
28
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
4.6
Trailer operation
The vehicle must be certified for trailer operation.
Observe the national regulations for trailer operation.
The specific national driving license is required.
Transporting persons on and in trailers is not permitted.
Observe the maximum permissible drawbar load and trailer load.
Do not exceed the permissible trailer speed.
Trailer operation with the towing gear of the vehicle is prohibited.
Trailer operation changes the vehicle’s operating behavior; the oper-
ator must be familiar with this and act accordingly.
Bear in mind the vehicle’s steering mode and the trailer’s turning
circle.
Before coupling/uncoupling the trailer, secure it to prevent it from
rolling away (e.g. with the parking brake, suitable wheel chocks).
There must be nobody between the vehicle and the trailer when
hitching a trailer.
Couple the trailer onto the vehicle correctly.
Ensure that all equipment works correctly (for example the brakes,
lights).
Before starting vehicle travel, ensure that nobody is between the
vehicle and the trailer.
4.7
Operation of attachments
4.7.1
Attachments
Only use attachments that are certified for the vehicle or its protective
equipment (for example splinter protection).
All other attachments require the vehicle manufacturer’s release.
The danger zone and the work area depend on the attachment used.
See the operator’s manual of the attachment.
Secure the load.
Do not overload attachment.
Check the correct position of the lock.

Table of Contents

Related product manuals