Weidemann Basic line 4080T - Fluid Level Checks: Fuel, Oil, Coolant, Hydraulics

Maintenance
9.6 Checking fill levels
184
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
Vehicle fluids for the engine Deutz TCD 2.9 L4 (55.4 kW)
Position Capacity Fluid Specification
Fuel tank 82 l Diesel fuel EN590 (EU)
BS2869:2010 class A2
(GB)
ASTM0975, class 2D S15
Engine oil with filter 8.8 l Engine oil SAE 10W40
Ambient temperature -20
°C to +40 °C
Low-soot engine oil
API CJ-4
ACEAE9
ECF-3
Cooling system 10 l Water with commercially
available HD-coolant/anti-
freeze compound
ASTM D6210
The oil level up to the markings or check plugs is binding for the oil filling!
9.6
Checking fill levels
9.6.1
Fuel level
CAUTION
Health hazard due to fuel!
Fuel and its vapors are harmful to health.
► Avoid contact with the skin, eyes and mouth.
► Seek medical attention immediately in case of accidents with fuel.
► Wear protective equipment.
CAUTION
Fire hazard due to fuel!
Fuels form flammable vapors. This can cause fires that lead to injuries.
► Do not smoke, avoid fire and open flames.
► Gasoline admixtures for diesel are prohibited.
NOTICE
Damage due to excessive sulfur content in the fuel!
Low-grade fuel can cause damage to the engine.
► Only use low-sulfur diesel with specification EN590 (EU),
BS2869:2010 class A2 (GB) or ASTM D975 class 2D S15 (USA).
► Do not use heating oil.
► Do not add gasoline.