Weidemann Basic line 4080T - Exhaust Gas Aftertreatment System

Maintenance
9.14 Exhaust gas aftertreatment system
212
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
9.14
Exhaust gas aftertreatment system
9.14.1
Information on exhaust gas aftertreatment
The vehicle may be fitted with a system for exhaust gas aftertreatment.
The system may vary depending on the engine option, the system.
Engines with diesel oxidation catalytic converter:
• Deutz engine TCD 2.9 L4 (55,4kW): see Diesel oxidation catalyst on
page 212
Engines with diesel particulate filter:
• Deutz engine TCD 2.9 L04 (55,4kW): see Diesel particulate filter en-
gine TCD 2.9 on page 214
9.14.2
Diesel oxidation catalyst
WARNING
The exhaust system becomes very hot. There is a risk of burning!
During regeneration, exhaust gas temperatures of approx. 600 °C can oc-
cur in the exhaust system, even when the engine is idling.
► Keep your hands clear of the exhaust outlet.
► Keep a safe distance from the exhaust system.
► Do not open engine cover during regeneration and shortly after.
NOTICE
The exhaust system becomes very hot. There is a risk of fire!
Hot exhaust gases can cause fires in environments with highly flammable
materials and cause significant property damage.
► When regenerating the diesel particulate filter, make sure that there
are no easily inflammable materials in the direct vicinity of the ex-
haust system, e.g. paper, dry grass, wood, wooden ceilings, oil,
fuels, etc.
► Do not park the vehicle with the engine running in direct proximity to
easily flammable materials.
► Do not use corrosion-protection agents for the exhaust system.
These can ignite at the exhaust system.
► In environments with easily flammable material, disable the "auto-
matic regeneration" mode.
► Do not start "manual regeneration" in environments with flammable
materials.