Weidemann Basic line 4080T - Warning Lights and Control Lights

Commissioning
6.4 Warning lights and control lights
92
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
6.4
Warning lights and control lights
6.4.1
Meaning of the warning lights and control lights
Warning lights and control lights serve as a source of information.
Warning lights warn of damage to the vehicle. If a warning light illumin-
ates during operation, immediately shut down the vehicle and contact an
authorized service center.
The warning lights and control lights illuminate for self-testing when the
ignition is switched on.
Fig.73: Overview of warning lights
and control lights
Overview of warning lights and control lights
"Turn signal" control light
Flashes intermittently when the turn signals are used.
Warning light "Parking brake"
Lights up when the parking brake is applied. The drive system
is locked when the parking brake is applied.
Warning light "vehicle electronics"
If the warning light illuminates during operation – stop the en-
gine.
• If no error code appears in the vehicle display:
– Start the engine and resume vehicle travel.
• If an error code appears in the vehicle display:
– Obtain information on page [}227].
– Contact a WackerNeuson service center.
Warning light "vehicle electronics"
If the warning light illuminates during operation – stop the en-
gine.
• If no error code appears in the vehicle display:
– Start the engine and resume vehicle travel.
• If an error code appears in the vehicle display:
– Obtain information on page [}227].
– Contact a WackerNeuson service center.
Warning light "Engine electronics"
Illuminates or flashes if one or more engine-operation values
are outside the normal range – stop the engine.
• If no error code appears in the vehicle display:
– Start the engine and resume vehicle travel.
• If an error code appears in the vehicle display:
– Obtain information on page [}227].
– Contact a WackerNeuson service center.