EasyManua.ls Logo

Weidemann Basic line 4080T - Vehicle Maintenance and Servicing; General Maintenance Safety and Responsibilities

Weidemann Basic line 4080T
250 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Safety instructions for maintenance 9.1
175
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
9
Maintenance
9.1
Safety instructions for maintenance
9.1.1
Responsibilities and prerequisites
The maintenance and inspection personnel must have specialized
knowledge about the maintenance and inspection work on the
vehicle.
The necessary expertise can be obtained at training sessions
from our Service department.
Perform maintenance and inspection work only with suitable protect-
ive equipment.
Perform only the maintenance and inspection work described in this
operator’s manual.
9.1.2
Safety instructions
Information on maintenance
Only perform maintenance and inspection work after having read and
understood the operator’s manual.
Pay attention to the basic safety instructions and to all the safety la-
bels affixed on the vehicle.
The operator’s manual describes the work to be performed.
However, the descriptions of the work processes provide the re-
quired information only to experienced technically trained person-
nel having appropriate knowledge.
Always store the operator’s manual in the place provided for it on the
vehicle.
The work that is not specified in this operator’s manual may only be
performed by an authorized service center.
Information on the vehicle and the attachment
Only perform maintenance and inspection work if the vehicle is se-
cured.
A raised loader unit can fall suddenly and cause serious injury.
If working under the raised loader unit is unavoidable, then the loader
unit must be secured by a suitable support.
Lower attachments on the ground ensuring that no movements can
occur when releasing mechanical or hydraulic connections.
Secure equipment or components that are to be attached or re-
moved, or whose installation position is to be changed, with the aid of
suitable lifting gear or with mounting or support devices to prevent un-
intentional movement, slipping or falling.
Remove dirt from steps and handholds to keep them safe and ready
for use.
9

Table of Contents

Related product manuals