Maintenance
9.8 Cleaning and maintaining vehicle
200
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
9.8
Cleaning and maintaining vehicle
9.8.1
Information on cleaning and care
NOTICE
Damage to vehicle due to cleaning work!
► When cleaning the vehicle, pay particular attention to the underside
of the vehicle. Do not allow dirt to collect on the engine or gearbox.
► Do not clean sensitive electrical components such as alternators,
fuse boxes, control levers, etc. with a high-pressure cleaner.
Environment
Avoid environmental damage!
► Clean the vehicle in a suitable place where the dirty waste water can
be collected in an environmentally friendly manner.
► Collect contaminated water and dispose of it in an environmentally
friendly manner.
When cleaningthe vehicle with a high-pressure cleaner, observe the fol-
lowing:
• Maximum water pressure 130 bar.
• Maximum water temperature 80 °C.
In order to avoid damage to labels and other sensitive parts, do not hold
the nozzle of the high-pressure cleaner too close to the vehicle.
9.8.2
Cleaning the air filter
NOTICE
Damage to the engine caused by a dirty air intake system!
Engine damage can occur if the engine draws in dirty air.
► Perform maintenance on the air filter according to the maintenance
intervals specified in this operator’s manual.
► Do not let the engine run if parts of the air intake system are re-
moved.
► Immediately replace damaged air filters.