Safety
4.10 Measures for avoiding risks
38
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
4.10.12
Noise
• Observe the noise regulations (for example during applications in en-
closed premises).
• Bear in mind external sources of noise (compressed-air hammer,
concrete saw).
• Do not remove the sound baffles of the vehicle and attachment.
• Have damaged sound baffles immediately replaced (e.g. an insulat-
ing mat, muffler).
• Before starting work, get informed on the noise level of the Vehicle/at-
tachment (e.g. on the label).
– Wear ear protectors.
• Do not wear ear protectors during vehicle travel on public roads or
sites.
4.10.13
Cleaning
• Risk of injury from compressed air and high-pressure cleaners.
– Wear appropriate protective equipment.
• Do not use any dangerous and aggressive detergents.
– Wear appropriate protective equipment.
• Operate the vehicle only in a clean condition.
– Keep climbing aids (handholds and footholds) free from dirt, snow
and ice.
– Keep the cab windscreens and visual aids clean.
– Keep the headlights and work lights clean.
– Keep the control elements and control lights clean.
– Keep the safety and information labels clean, and replace dam-
aged and missing labels by new ones.
• Perform cleaning work only if the engine is stopped and cooled down.
• Bear in mind sensitive components and protect them accordingly
(e.g. electronic control units, relays).
To Next Page
Loading...
