Description of the vehicle
5.2 Brief description of the vehicle
40
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
Type designation Trade name
The type designation is stamped on
the vehicle chassis and printed on
the nameplate
The trade name is affixed to the
vehicle.
RL60T 4080T Basic Line
5.2.2 Main components of the vehicle
• Sturdy steel chassis
• Four-cylinder in-line engine; mounted on oscillating elements; water-
cooled
• ROPS/TOPS tested cab
– ROPS is the abbreviation for Roll Over Protective Structure
– FOPS is the abbreviation for Falling Object Protective Structure
• Drive system via progressively adjustable hydraulic system
• Maximum speed
– Standard: 20 km/h
– Option 30 km/h
• Fully hydraulic articulated pendulum steering
• Front and rear planetary axles
• Service brake: Hydraulically activated drum or disc brake
• Parking brake: Mechanically operated drum brake
• Telescoping loader unit with hydraulic lock for attachments
The vehicle can be equipped with the "Telematic" function (transmission
of operational data, location, etc. via satellite)! Please contact your sales
partner if you require information on the "Telematic" function.
The vehicle is a self-propelled work vehicle according to German road
traffic regulations (StVZO). Observe the legal regulations of your country.
Refer to chapter Intended use for the different applications the vehicle
can be used for.
The vehicle consists of the vehicle chassis, drive and axles. The drive
and control units, the driver's platform and the loader unit are located in/
on the vehicle frame.
5.2.3
Diesel engine
The diesel engine is equipped with a system for exhaust gas aftertreat-
ment. This means that the engine complies with the exhaust emission
standards 2016-1628 EC Stage IV / EPA Tier 4F (valid in EU member
states, the USA, Canada and Switzerland).
The system for exhaust gas aftertreatment system is a closed system. it
consists of:
• a diesel particulate filter (DPF).
To Next Page
Loading...
