Description of the vehicle
Brief description of the vehicle 5.2
43
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
5.2.9
Loader unit
The loader unit consists of a telescoping arm that can be hydraulically ex-
tended and retracted in addition to the usual lifting function. The loader
unit is equipped with a power coupler system for connecting attachments.
The lock of the power coupler is operated hydraulically.
The hydraulic functions of the loader unit are carried out with various hy-
draulic cylinders. Various hydraulic connections for attachments with hy-
draulic functions are located on the loader unit. The loader unit also in-
cludes the attached attachment.
5.2.10
Cab
The cab is tested with category 1 ROPS/FOPS protection.
• ROPS is the abbreviation for: Roll Over Protective Structure
• FOPS is the abbreviation for Falling Object Protective Structure
The cab is mounted on vibrating elements. The cab contains the seat for
the operator and the operating and control elements.
5.2.10.1
Front window protective screen
WARNING
Accident hazard due to restricted field of vision during vehicle travel
on public roads!
The operator may fail to see other motorists due to a limited field of vis-
ion.
► Remove the protective screen before performing vehicle travel on
public roads.
Fig.4: Protective screen for front
window
The protective screen is an additional protection for the operator against
falling objects, and against objects that could penetrate into the driver's
cab from the front. The protective screen is removable.
Prepare assembly / disassembly of protective screen
ü Only install the protective screen with the help of a second person.
▪ Park the vehicle on a stable, level and dry surface.
Installing protective screen
ü Preparations for assembly carried out.
1. Place the protective screen on the cab.
2. Screw the protective screen to the provided brackets using the
screws supplied.
5
To Next Page
Loading...
