Description of the vehicle
Type plates and stickers 5.5
69
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
Fig.28: Label Cooling system
Safety label: Hot coolant
CAUTION!Scalding hazard due to hot engine coolant.
At operating temperature the coolant is hot and the cooling system is un-
der pressure.
• Open the filler cap of the cooling system only after the coolant has
cooled down.
• Open the filler cap of the cooling system carefully to allow the pres-
sure to escape slowly.
• Wear protective gloves and safety glasses.
Fig.29: Label starting key
Safety label: Remove the starting key
CAUTION!Risk of injury from maintenance work.
• Remove starting key before performing inspections and maintenance
on the vehicle.
• Read and observe the operator’s manual prior to performing mainten-
ance.
Fig.30: Safety label Lower loader
unit
Safety label: Tipping hazard when lowering the loader unit
CAUTION!Risk of injury when lowering the loader unit with the tele-
scopic boom extended.
If the loader unit is lowered with the telescopic boom extended, the safe
working load may be exceeded. This may cause the vehicle to tip for-
wards
• First retract the telescopic boom and then lower the loader unit.
• Observe the safe load indicator.
• Read and follow the operator’s manual.
5
To Next Page
Loading...
