OAX-System 105
Dynamics
(for the other curves appears here: Threshold On, Volume On, Modulation On)
Here, the current curve is switched on or off.
Set for all manuals
With this function, the selected curve preset is transferred to all selectors. Before the setting is transferred to
the other selectors, a confirmation query appears, which you must confirm with YES.
If the setting remains active, each change is transferred directly to all selectors.
Set as Gobal
You've probably noticed the "Set as Global" function in other areas. If a preset is marked as GLOBAL, this
selection is preserved in all Total Presets, even if you have saved different curves in Total Presets.
This setting is maintained even after switching off and on until this setting is switched off again by hand.
Set as the default
You can set a curve preset as the default preset. Whenever you do not save a special curve to a Total Preset,
the Total Preset automatically selects this default preset.
Reset to Default
Once you press this button, the current default preset is loaded for editing.
To Next Page
Loading...
Need help?
General
