The PROFI-Display
140 Operating Manual
7.10.3.2 The Chorus
The chorus effect causes a "floating" sound effect and is used with preference for stage piano sounds. There
are 3 different chorus presets available. You can set and save more yourself.
Here the volume of the chorus part is set. The identical setting can also be found in the quick
operation of the effects in the chapter 4.8.3.2 Fast operation.
Setting the speed of the chorus up to 20Hz.
Here the depth of the chorus can be set.
Setting the pre-delay of up to 24ms.
The Sound setting affects the frequency response of the chorus.
Here the portion of the chorus is set, which "flows back" into the chorus as feedback.
The "Reset to Default" button sets the chorus settings to the values as they are
originally stored in the currently selected Total Preset.
To Next Page
Loading...
Need help?
General
