The PROFI-Display
124 Operating Manual
Load sound onto a selector
1. In PROFI mode, select the selector with which you want to occupy the desired sound.
2. Press the display area sound and the sound list shown above opens.
3. In the list, select the sound you want. You can play these on the corresponding manual before the
actual loading.
4. Press Load to load the sound onto the selector. If you do not want to apply the sound to the selector,
you can leave the list with Back.
Note: Most of the sounds in the list are associated with the sound buttons. However, there are also sounds
that are only used for styles or MIDI sequences. These are then not assigned to the sound buttons, as these
are usually not playable on a keyboard.
To Next Page
Loading...
Need help?
General
