Overview of the control panels
64 Operating Manual
As soon as you have briefly tapped the Delay button, the display will appear to set the Echo effect.
For thee MANUALS, ACCOMPANIMENT and DRUMS areas,
you will find a controller with which you can adjust the
output of the Echo effect device, also called RETURNS.
Small tip: As long as no sound is selected, the echo is used,
no change may be heard. To set the echo effect per sound,
see the chapter for EASY mode 6.2 „The EASY Manual
Controller“ or PROFI mode in chapter 7.3.1 „The Standard
Control“.
If you do not make any settings, the display will disappear
after a few seconds. When the HOLD display button is
pressed, the display remains permanently displayed.
You can use the appropriate slider to vary the volume of
the echo effect.
With RESET, you reset the volume to the value stored in
the Effects program.
To change the DELAY program, briefly tap the
appropriate name field. Here in the example on "Delay
Tempo" in the manuals area.
The selection box of possible Echo programs opens.
Once you have programmed your own effect settings
and given a name, these effect presets will also appear
in this list.
Note: You can find out how to program your own effects
in the chapter 7.10 Effects.
4.8.3.5 LM-Hold
With this function, the sounds can be held by keys in the lower manual (left manual), i.e.: you can take your
hand away and the sounds continue to sound.
To Next Page
Loading...
Need help?
General
