OAX-System 121
Your OAX system can show notes and texts in the display.
Further information can be found in the programming instructions in the chapter
„Show sheets on the display“.
Page 2 from 3
Under the "Global Settings" you can change some standard parameters.
You will find information on this in the programming instructions.
Save your data on the internal hard drive or a USB stick.
You will find information on this in the programming instructions.
Here you can read the operating and programming instructions as well as the data list directly on the display.
Software update: You can read at any time what has changed in the software with the various versions.
Page 3 from 3
Here you can find out everything about the VST host and VST plug-ins in the
programming instructions.
With this extension, new functions can be assigned to the CC controller on the left
and to the drawbar drawbars. Information on this can be found in the programming
instructions.
To Next Page
Loading...
Need help?
General
