Winkhaus blueMatic EAV4 - Settings (firmware, parameters, help, signal generator)

5107364118
5
EN
blueMatic EAV4 / EAV4+ Installation, Operating and
Maintenance Instructions
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.com ∙ Subject to technical changes
Notice: If the current firmware
differs from available firmware
version  an update is required.
• Firmware
– Currently installed firmware
– Available firmware
– ST version (STM microcontroller)
6: Hardware revision/13: Software version
• Check firmware status:
– Press "Firmware"
5.3.7 Settings (firmware, parameters, help, signal generator)