Winkhaus blueMatic EAV4 - Page 82

510736482
3
EN
blueMatic EAV4 / EAV4+ Installation, Operating and
Maintenance Instructions
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.com ∙ Subject to technical changes
Figure 3.6.2-8: Wiring blueMatic EAV4 / EAV4+ with "Fingerprint
Navkom Bioreader" here control unit on the lock side (similar also for
Biopass / Biohandle / touchpad / module...) (sash side)
Assembly -wire blue
motor housing plug
-wire white plug for
access control 
Description Part-no.
Cable transition
T-KÜ-T FT M
plus cover plate (depends
on the faceplatematerial
type) plug-in

alternatively cable transi-
tion T-KÜ-T FT M

alternatively cable transi-
tion T-KÜ-T FT M

Frame part cable transition
T-KÜ-T RT cable M
for external power supply
mounting on DIN rail

T-MOTORKASTEN EAV
(V) BL

T-MOTORKASTEN EAV
(V) BL
(with app control)

for retrofitting mechanical locking
systems AVD standard
to
Order directly via Navkom
Navkom
Bioreader Navkom
Fingerprint in the door
sashsilver or black
R-BR-S
oder
BR-B
Control unit in
shrink tube
R-CU-
BBX
Cable connection to
WH motor housing
C-BBX-
-W
SH 
white  V DC
brown V Masse
green external opening signal
yellow not used
grey
pink
green  external opening signal (unlock)
greypink  only with EAV otherwise
not used potential-free
signal output various
signals adjustable
• Default  door closed 
locked
• alternatively signal for
swing door opener
Notice! max  m extendable
(min  x  mm)
}
EAV
potential-free
signal-output