510736493
4
EN
blueMatic EAV4 / EAV4+ Installation, Operating and
Maintenance Instructions
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.com ∙ Subject to technical changes
Notice:
For EAV4+ or in the doorControl app, these signal tones can be
set, for example:
• all signals deactivated
• all signals activated
• only "unlocked" signal active
• only "locked" signal active
• only "error" signal active
Notice: The latch retraction time can be set in the doorControl
App from 1 second to max. 60 seconds.
Notice: In the event of a voltage breakdown and locking in the
initial position, the door can be locked and unlocked using the
key or it can be unlocked via the handle on the inside of the
door!
Opening/unlocking the door from the outside
• The door is unlocked from the outside via the doorControl App (only for
EAV4+), or connected access control systems (e.g. fingerprint) or with the
key.
• If the door is not opened after motorised/mechanical unlocking and remains
in the zero position", automatic locking takes place again after the latch
retraction period (default setting: 2 seconds).
To Next Page
Loading...
