3064298_201805 23
Anchorageandanti-vibrationmounts
12 Anchorageandanti-vibrationmounts
12.1 Concretefoundation
Cast,levelplinthofconcretewithgravelbaseprovidingsufcient
frost protection, cut-out for cable/line entry, see foundation
diagram
Tighten the nuts of the
rubber mounts till
about 8 mm of rubber
is visible
8 mm
Secureinaccordancewithstructuralcharacteristics,takingintoaccount
theapplianceweight.
Please
note
12.2 Wallmounting
Secureinaccordancewithstructuralcharacteristics,takingintoaccount
theapplianceweight.
Please
note
Tighten the nuts of the
rubber mounts till
about 8 mm of rubber
is visible
8 mm