Xerox 6204 - Invert Image

4 Scan
96 Xerox 6204 Wide Format Solution
Scan
4
2 [Disabled] is selected by default. Select
[Enabled] to define the amount of scan offset.
Disabled
Scan offset will not be applied to the original.
Enabled
A scan offset equivalent to the dimension you
specify will be applied to the original when it is
scanned.
3 Set up the scan offset, using the numeric keypad
or the scroll buttons, and then select [Save].
Invert Image
The Invert Image feature reverses the black and white portions of the original image.
The factory default setting is [Off].
Procedure
1 Select the [Invert Image] button.
The [Invert Image] screen will display.
2 Select [On] or [Off].
Off
Negative Image is not applied.
On
Negative image is applied, and the black and white colors
are reversed.
3 Select [Save].