Xerox 6204 - Localization

6 System Setup
120 Xerox 6204 Wide Format Solution
System Setup
6
Localization
The [Localization] feature enables you to select the default language and dimensions
that will display on the touch screen and web interface, and on controller-generated test
prints, banner sheets, configuration pages, etc.
Note: The [Custom] language selection affects only the touch screen display.
Procedure
1 Select the [Localization] button on the [Menu]
screen.
The [Localization] screen will display.
2 Select the button of the appropriate language.
3 Select the [Inches] or the [Millimeters] button to
set up the default units of measurement.
4 Select [Save].