Xerox 6204 - Default Screen

Control Panel
Xerox 6204 Wide Format Solution 127
System Setup
6
Default Screen
The Default Screen option enables you to select the default touch screen display. The
selected default screen will display when the following occur:
z
the machine power is switched on
z
the machine exits the Power Saver mode
z
the machine exits the System Administration mode
z
the user finishes checking the machine status
z
the user presses the <Clear All> button
The default setting is [Copy].
Procedure
1 Select the [Setup] button on the [Menu] screen.
The [Setup] menu will display.
2 Select [Control Panel] on the [Setup] menu.
The [Control Panel] menu will display.
3 Select [Default Screen].
The [Default Screen] selections will display.