3 Copy
70 Xerox 6204 Wide Format Solution
Copy
3
Image Location
Procedure
You may change the location on the copy where the image will be printed by shifting
the image to the left, right, top, or bottom. You also can set up the feature to
automatically center the image on the media. The factory default setting is [Corner
Shift].
1 Select [Image Location] on the top [1] [More
Features] tab.
The [Image Location] screen will display.
2 Select [Auto Center] or [Corner Shift].
Auto Center
The center of the original is centered on the copy.
Corner Shift
The original image is shifted to the edges or
corners of the media. Use the arrow buttons to
shift the image to the desired location.
3
Select [Save] after making your selections.
To Next Page
Loading...
