Xerox 6204 - Scanning Overview

Setting up the [More Features] selections
Xerox 6204 Wide Format Solution 73
Copy
3
Invert Image
The Invert Image feature reverses the black and white portions of the original image on
the copy. The factory default setting is [Off].
Procedure
1 Select tab [2] at the right edge of the [More
Features] tab to display the [Invert Image]
feature button.
2 Select [Invert Image].
The [Invert Image] screen will display.
3 Select [On] or [Off], and then select [Save].
On
Negative image is applied to copies, so that the black
and white colors are reversed.
Off
Negative Image is not applied to copies.
Note: When the original size is smaller than the
media size, white margins will appear.