Timers
Xerox 6204 Wide Format Solution 139
System Setup
6
5. File Deletion
Specifies the maximum amount of time a scanned image file remains on the server
before being deleted. This timer pertains only to files scanned when the 6204 Wide
Format Solution with FreeFlow Accxes Print Server is in the READY TO SCAN mode.
This timer can be set between 1 and 24 hours in increments of 1 hour. When a file is
scanned in, it is given a time stamp. When the age of the file on the hard disk exceeds
the value of the [File Deletion] timer, the file is automatically deleted to allow space for
new files. After the files have been deleted, the directory will also be deleted if no other
files are scanned to it. The default value for [5. File Deletion] is [24 hours].
Procedure
1 Select the [Setup] button on the [Menu] screen.
The [Setup] menu will display.
2 Select [Timers] on the [Setup] menu.
The [Timers] screen will display.
3 Select [5. File deletion].
The [File Deletion Timeout] screen will display.
4 Using either the scroll buttons or the numeric
keypad, enter the timeout setting, and then
select [Save].
5 Select [Close] on the [Timers] menu to return to
the [Setup] screen.
To Next Page
Loading...
Need help?
General
