6 System Setup
122 Xerox 6204 Wide Format Solution
System Setup
6
Clock
The time that displays on the touch screen, and also appears on controller-generated
prints (banner sheets, reports, error messages, etc.), is set up using the [Date and
Time] feature button on the [Setup] menu.
Procedure
1 Select the [Setup] button on the [Menu] screen.
The [Setup] menu will display.
2 Select [Date and Time].
The [Date and Time] menu will display.
3 Select [Clock].
The [Machine Clock] screen will display.
4 The [Year] field will be selected when the
[Machine Clock] screen displays. Use either the
numeric keypad or the on-screen scroll buttons
to enter the current year.
5 Continue setting up the Machine Clock by
selecting the [Month], [Day], [Hours], and
[Minutes] numeric entry fields, and for each,
using either the numeric keypad or the scroll
buttons to enter the correct setting.
6 Select [Save].
To Next Page
Loading...
Need help?
General
