7 System Administration
152 Xerox 6204 Wide Format Solution
System Administration
7
System Administration Overview
Although most of the features of the Xerox 6204 Wide Format Solution with FreeFlow
Accxes Print Server can be selected from the [Menu] screen, which is accessible to all
users, the System Administration features must be accessed by logging in to the
system.
Note: Access to the System Administration features can and should be password
protected.
The information in this chapter includes the procedure for setting up and using the
system administration login. The following topics appear within this first section of this
chapter:
Entering the System Administration Mode ....................................................................................152
Exiting the System Administration Mode ......................................................................................153
System Administration Features.....................................................................................................154
Entering the System Administration Mode
The procedure for entering the System Administration mode is as follows.
Procedure
1 Press the <Log In/Out> button.
The machine will enter the System Administration mode.
Note: The factory default system password is "0" (zero). At
this setting, the touch screen will display the [System
Administration] menu screen when anyone selects
the <Log In/Out> button.
To prevent unauthorized access to the System
Administration features, a system password should
be entered as soon as possible after installation
(refer to "Change Password" (P.156)).
After the system password is set up, a login
screen will display when the <Log In/Out>
button is selected, restricting access to the
authorized individual(s).
2 Create a system password following the procedure in "Change Password" (P.156)
<Log In/Out>
To Next Page
Loading...
Need help?
General
