Xerox 6204 - Print Interrupt

6 System Setup
138 Xerox 6204 Wide Format Solution
System Setup
6
4. Print Interrupt
The Print Interrupt feature controls how long the Printer remains in the interrupted state
with no interruption at the control panel. This timer pertains to print jobs that have been
interrupted to allow a copy job to process. The allowed range is 1 to 99 minutes. The
factory default value for [4. Print interrupt] is [1 minute].
Procedure
1 Select the [Setup] button on the [Menu] screen.
The [Setup] menu will display.
2 Select [Timers] on the [Setup] menu.
The [Timers] menu will display.
3 Select [4. Print interrupt].
The [Print Interrupt] screen will display.
4 Use the scroll buttons or the numeric keypad to
select a timeout setting, and then select [Save].
5 Select [Close] on the [Timers] menu to return to
the [Setup] screen.