Xerox 6204 User Manual

2 Product Overview
40 Xerox 6204 Wide Format Solution
Product Overview
2
Cutting Roll Media
The following describes how to cut the lead edge of roll media.
Procedure
1 Open the front doors.
2 Pull out the drawer for Roll 1 or Roll 2.
WARNING: Do not open the Roll 1 or Roll 2 cutter cover unless you are specifically
directed to do so.
3 Press the cutter button to cut the lead edge of
the media.
The lead edge of the media is cut.
Note: Pressing the cutter button one time cuts about 8.3
inches (210 mm) of media from the lead edge of the
roll. When the cutter button is held down, the roll
media feeds continuously until the cutter button is
released. The roll media is cut when the cutter
button is released.
4 Remove the piece of paper that was cut.

Xerox 6204 Specifications

General

Print Technology	Laser
Maximum Print Resolution	600 x 600 dpi
Copy Function	Yes
Scan Function	Yes
Standard Paper Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Duplex Printing	Manual
Display	LCD
Media Sizes Supported	A4, A5
Connectivity	USB 2.0, Ethernet
Functions	Print, Copy, Scan
Scan Resolution	600 x 600 dpi
Scan Type	Flatbed
Mobile Printing	No