Xerox 6204 - Save Default Template

5 Store/Recall
116 Xerox 6204 Wide Format Solution
Store/Recall
5
Save Default Template
The Save Default Template option enables you to save the settings from the current
job as the default settings.
Procedure
1 Ensure that all of the copy job settings are set up as desired, and then run the copy.
Running the job will store its settings in memory.
2 Press the Store/Recall button.
The [Store/Recall] menu will display.
3 Select [Save Default Template].
A confirmation screen will display, indicating that the
job parameters have been saved.
4 Select [OK] to save the current settings as the
default template.