Xerox 6204 - Page 138

6 System Setup
130 Xerox 6204 Wide Format Solution
System Setup
6
2 Select [Control Panel] on the [Setup] menu.
The [Control Panel] menu will display.
3 Select [Custom Menus].
The [Custom Menus] menu will display.
4 Select the option(s) that you wish to set up:.
[1. Custom R/E]
[2. Original Series 1...]
[3. Original Series 2...]
Custom R/E
After selecting [1. Custom R/E], use the numeric
keypad or the scroll buttons to enter the desired
R/E setting. The setting range is from 25.0 to
400.0 percent, in 0.1 percent increments.
Original Series 1
Selecting [2. Original Series 1] displays the
[Original Series 1] screen. You may select any
one of the four options.
Notice that the default series selections shown here and on
the next screen display as options on the [Original Size
Series] tab shown on the previous page.