6 System Setup
144 Xerox 6204 Wide Format Solution
System Setup
6
5 Either select one of the displayed R/E preset
buttons or select the numeric entry field and
enter a Custom R/E value (using the numeric
keypad or the scroll buttons).
Note: The value entered may range from 25.0% to
400.0%, on 0.1% increments. An out of range
message will appear if the entered value is too large
or too small.
6 Select [Save].
7 Repeat steps 4 through 6 to set up the remaining [Custom R/E...] presets.
8 Select [Close] to return to the [Copy Options] menu.
To Next Page
Loading...
Need help?
General
