Xerox 6204 - Page 67

Copying from Memory
Xerox 6204 Wide Format Solution 59
Copy
3
To Change Job Settings and then Print:
To change the job settings and then print the stored job, first set up the necessary
options on the [Override Settings] screen, that is, select from the available [Basic
Copy], [Image Quality], and [More Features] settings, and then select [Print].
The <Transmitting> indicator will illuminate, the <Copy from Memory> indicator will go out, the
[Copy] screen will display, and the stored job will print.The changed settings are applied only to
the reprints. The original copy job settings are retained unchanged in memory.
Note: The Copy from Memory mode will cancel automatically after a predetermined period
elapses without a copy being made.