Interrupting a Print Job to Scan a Document
Xerox 6204 Wide Format Solution 87
Scan
4
7 When scanning is done, press the <Interrupt> button again.
The interrupt mode will be cancelled, the <Interrupt> button’s indicator lamp will extinguish, and the
suspended print job will resume.
Note: If you forget to press the <Interrupt> button to cancel the interrupt mode, the mode will be
canceled automatically after the default [Print Interrupt] timer times out.
Note: The print interrupt timeout period may be changed from the 60 second default to as long as 99
minutes. This is accomplished by selecting the [Setup] button on the control panel, then selecting
the [Timers] feature, and finally, [4. Print interrupt]. Use either the numeric keypad or the scroll
buttons to select a different timeout period.
To Next Page
Loading...
