Xerox CopyCentre C2128 Quick Reference Guide

PAGE 4-6 XEROX COPYCENTRE/WORKCENTRE PRO C2128/C2636/C3545 QUICK REFERENCE GUIDE
FAX
DIALING
CHARACTERS
Dialing characters are special characters used for entering fax numbers. They are
entered as part of the telephone number:
BEGIN DTMF [*]
Starts a sequence of DTMF (Dual Tone Multi-frequency)
characters.
END DTMF [#]
Ends a sequence of DTMF (Dual Tone Multi-frequency)
characters.
WAIT FOR DIAL TONE
[=]
Suspends dialing until an expected network dial tone is
detected. Can also be used to detect a specific tone when
accessing an outside line or other services.
PULSE TO TONE
S
WITCH [:]
Used to switch from pulse dialing to DTMF (tone or one-
touch) dialing. After switching from pulse to tone, you cannot
switch back to the original mode during the fax procedure.
READABILITY DIGITS
[()]
Identifies the different components of the fax number, for
example the dialing code (1234) 56789.
START MAILBOX
S
IGNALLING [!]
Pauses regular fax dialing and starts DTMF (Dual Tone Multi-
frequency) procedure for the fax mailbox.
PAUSE [,]
Gives the machine time to switch from an inside line to an
outside line during automatic dialing. For additional pause
time, add multiple pauses. For charge code numbers, enter a
pause after the fax number but before the charge code
number.
PRIVATE DATA
D
ELIMITER [/]
Protects confidential information, For example, if a special
charge code or credit card number is required for a call. The /
character should be selected before and after entering
confidential numbers. The numbers and characters entered
between this character will appear as asterisks (*).
LINE SELECTION
I
DENTIFIER [<1>]
Used to select Line 1 to dial the number. Selecting this
character temporarily overwrites the fax settings and is for
the current job only.
LINE SELECTION
I
DENTIFIER [<2>]
Used to select Line 2 (if installed) to dial the number. If a
second line is not installed then this option will not be
available. Selecting this character temporarily overwrites the
fax settings and is for the current job only.

Xerox CopyCentre C2128 Specifications

General

Brand	Xerox
Model	CopyCentre C2128
Category	Copier
Language	English