General Information
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
1-7
Service Safety Summary
General Guidelines
For qualified service personnel only: Refer also to the preceding Power Safety Precautions on
page 1-5.
Avoid servicing alone: Do not perform internal service or adjustment of this product unless another
person capable of rendering first aid or resuscitation is present.
Use care when servicing with power: Dangerous voltages may exist at several points in this product.
To avoid personal injury, do not touch exposed connections and components while power is On.
Disconnect power before removing the power supply shield or replacing components.
Do not wear jewelry: Remove jewelry prior to servicing. Rings, necklaces and other metallic objects
could come into contact with dangerous voltages and currents.
Warning Labels
Read and obey all posted warning labels. Throughout the printer, warning labels are displayed on
potentially dangerous components. As you service the printer, check to make certain that all warning
labels remain in place.
Safety Interlocks
Make sure all covers are in place and all Interlock Switches are functioning correctly after you have
completed a printer service call. If you bypass an Interlock Switch during a service call, use extreme
caution when working on or around the printer.
Servicing Electrical Components
Before starting any service procedure, switch the printer power Off and unplug the power cord from the
wall outlet. If you must service the printer with power applied, be aware of the potential for electrical
shock.
WARNING: Do not touch any electrical component unless you are instructed to do so by a service
procedure.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
