Xerox Phaser 6600 Service Manual

Maintenance
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
6-18
Adjustments and Maintenance Procedures
Color Registration
The printer automatically adjusts the color registration when automatic adjustment is turned on. You
can also adjust color registration manually any time the printer is idle. You must adjust the color
registration any time the printer is moved. If you are having printing problems, adjust the color
registration.
Setting Automatic Color Registration
1. At the control panel, press the Menu button (SFP) or Machine Status button (MFP).
2. SFP: Navigate to Admin Settings, then press OK.
MFP: Touch Tools, then touch Admin Settings.
3. SFP: Navigate to Service Tools, then press OK.
MFP: Touch Service Tools.
4. SFP: Select Auto Regi Adjust, then press OK.
MFP: Touch Auto Registration, then touch ON.
5. SFP: Select On, then press OK.
MFP: Touch OK.
Performing an Automatic Color Registration Adjustment
Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can
run this adjustment at other times as needed.
To perform an automatic color registration adjustment:
SFP Procedure
1. At the printer control panel, press the Menu button.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Select Adjust Color Regi, then press OK.
5. At Auto Adjust, press OK.
6. At the Are you sure? prompt, press the Up or Down arrows to select Yes, then press OK.
7. To begin the calibration, press OK.
MFP Procedure
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Touch Service Tools.
4. Touch Color Registration > Auto Registration > On.
The printer runs while it performs the Auto Registration routine.

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm