Xerox Phaser 6600 Service Manual

General Information
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
1-66
Functions
Resolution
Line Density in Fast Scan Direction: 600 dots/25.4mm
Line Density in Slow Scan Direction: 600 dots/25.4mm (fixed)
Operation Mode
Power-off State
The power switch is off and no power is supplied. The machine does not operate.
Ready (Standby) Mode
When the system starts up by power-on, it shifts from the power-off state to the Ready mode.
After pressing “Power Saver button” on the operator panel, the machine enters the Energy Saver Mode
to save more power consumption.
Running Mode
There are the Print mode, Scan mode, and FAX communication mode in which the IOT, IIT, and FAX
communication operate respectively.
Print Mode
In this mode, the IOT is operating for printing and report printing.
Scan Mode (MFP only)
In this mode, the IIT is operating for copy scanning, local scanning, network scanning, and FAX
scanning.
FAX Communication Mode (MFP only)
In this mode, FAX sending/receiving is in progress.

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm