Xerox Phaser 6600 Service Manual

General Information
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
1-54
Consumables & Maintenance Items
Consumables consist of C, M, Y, and K Toner Cartridges, C, M, Y, and K Imaging Units, and the Waste
Cartridge.
Each Toner Cartridge (except starter cartridges) has a CRUM (Customer Replaceable Unit Monitor) to
record regional and toner usage information. The CRUM maintains a count of the amount of toner
consumed. When the count reaches set values, warning and error messages appear to notify the user
when near and end of life status is reached.
Like the Toner Cartridges, each Imaging Unit has a CRUM to maintain a page count. When the count
reaches a set value, warning and error messages appear to notify the user that the Imaging Unit has
reached near or end of life status.
Life ratings are based on ISO/IEC 19798.
Consumables Capacity
CMYK Standard Capacity Toner Cartridges 2,000 color / 3,000 mono
CMYK High Capacity Toner Cartridges 6,000 color / 8,000 mono
CMYK Imaging Unit 60,000
Waste Cartridge 30,000

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm