Xerox Phaser 6600 Service Manual

Image Quality
Phaser 6600 and WorkCentre 6605 Xerox Internal Use Only
Service Manual
3-4
Image Quality FIP
This section describes the following image quality problems:
• The output is too light - 3-5
• Toner smears or print comes off - 3-7
• Random spots/Blurred images - 3-8
•Blank output - 3-9
• Streaked output - 3-11
• Partial or entire black output - 3-12
•Pitched color dots - 3-13
• Vertical blanks - 3-14
• Ghosting - 3-15
• Light-induced fatigue - 3-16
• Fog - 3-17
•Bead-Carry-Out (BCO) - 3-18
• Jagged characters - 3-18
•Banding - 3-19
• Auger mark - 3-20
• Wrinkled/Stained paper - 3-20
• Leading edge paper damage - 3-22
• Incorrect top and side margins - 3-23
• Color registration is out of alignment - 3-24
• Images are skewed - 3-25

Xerox Phaser 6600 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10 s
Print speed (black, normal quality, A4/US Letter)	36 ppm
Maximum duty cycle	80000 pages per month
Number of print cartridges	-
Internal memory	256 MB
Processor frequency	533 MHz
Maximum internal memory	768 MB
Sound pressure level (printing)	53 dB
Total input capacity	700 sheets
Total output capacity	250 sheets
Paper tray media types	Card stock, Envelopes, Glossy paper, Labels
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input frequency	50 - 60 Hz
Power consumption (standby)	65 W
Power consumption (printing)	535 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	25500 g
Dimensions (WxDxH)	429.26 x 487.68 x 383.54 mm